GV Number forwards to SIP.OBIHAI but I dont have one
`I have installed Incredible PBX on a HIformance VPS, created an OAUTH key for my GV number and run the scripts as prescribed. Why does my GV account list my number being forwarded to an Obihai device...
View ArticleClik here to view.
Google voice not connecting
<Registration/ServerURI..............................> <Auth..........> <Status.......> ==========================================================================================...
View ArticleUnable to make or receive calls
I've followed the instructions on this site http://nerdvittles.com/?p=23948 but I am still unable to recieve or make any calls on Yate using this PBX. Does anyone have a suggestion that I'm perhaps...
View ArticleNo dial-out on Raspberry PI3 registered to PBXes.org
Hi, I'm using IncrediblePBX for Raspberry PI (Asterisk 13.22.) It works properly with all providers and GVSIP is working fine with a few trunks. Now, as a backup route to GVSIP I created a PBXes.org...
View Articleplease help with skyetel setup
hello, first let me start by saying I was using incrediblePBX 13-13 with GV until they made it next to impossible to use it reliably. I ported my GV number to skyetel and was able to set it up on...
View ArticleBug? -Wazo Trunk gets unregistered after period of time.
Hello Team Wazo/Xivo, - I Have installed Wazo/Xivo on my server but I have noticed something rare, after a certain period of time my PBX gets unregistered from my provider. (VoIP.MS) The reason I know...
View ArticleOpensips , PIAF, TRUNK setup
I am looking to setup opensips and piaf in a lan by following this tutorial My question is how do i setup a trunk with my current ITSP, that needs username,. password and FQDN, in opensips? Currently...
View ArticleCan I use Comcast TM504G with PBX ?
Hope not a stupid question... I have a PBX server I just built for a client as he is in a Contract with Comcast for a few more years that include phones. they have a TM608G phone modem. Can we use this...
View ArticleSkyetel CallerID
Can you have Skyetel pass through the caller ID? I have caller ID enabled on Skyetel side. How do you get freepbx to receive the caller ID info? I assurme you say get from Trunk but that it is not...
View ArticleReally odd trunk issue - GXW4104
Valcom paging system has an FXS board that communicates with the GXW4104 FXO that I setup. The software is Incrediblepbx like 13 or something. I can get that info later but don't have access to the...
View ArticleGrandstream SIP trunk configuration
Good day all, I am new to pbx set up and configs. I have a question, currently I am setting up a sip trunk on to a grandstream 6108 ucm. To physically connect it to the pbx. Is it necessary to have a...
View ArticleSIP trunks with good voice quality
Hi! Not sure this is the right forum. I am using a SIP trunk with average prices US$0,015 for fixed phone and US$0,06 mobile in Europe, Latin America and the US. However, voice quality is a mess and...
View ArticleHow to show the same "words" on all the incoming calls?
Hi, I am new to the UCM6202 system so i apologize if i say any heresy. I have configured a UCM6202 with 1 extension, 1 Voip Trunk, and an Inbound route, but I can’t seem to figure out how I can...
View ArticleAnveo Direct with Incredible PBX
I decided I've had enough of Woot and have setup shop on Vultr. I ran thru the latest "Summer Surprise" article and have gotten stumped why I can't get Anveo working. I have enable the Anveo-1 thru 5...
View ArticleHowTo Question on routing outbound call
I have a question about dialing a local telephone number. The city I live in has a time / weather phone number that anyone can dial to get the current time / weather. As an example when you dial...
View ArticleGTI cell extensions compatible with 3cx?
Anyone know of a good reason why a GTI cell extension, mentioned here: https://nerdvittles.com/introducing-cellular-extensions-for-incredible-pbx-asterisk/ , might not work with 3cx? I know how to...
View ArticleHelp to configuration trunk SIP. From DIDWW to Elastix 4
Hello, I need to configure a DIDWW trunk (SIP) on an Elastix 4. I'm having a bit of trouble finding my way around. Could you help me? If so, what information do you need? Thanks in advance...
View ArticleNew FCC rules coming soon related to 911.
On November 17, 2022 the FCC issued a new report and order to improve 911 reliability by requiring service providers to notify the PSAPs in their service area of outages which might impact 911 service....
View ArticlePBX2021 - CallCentric trunk
How do I set up CallCentric trunk in PBX2021 for Oracle. If I use the preset trunk and insert my data, it automatically sets port 5080. Even if I create a new trunk with a different name, it...
View ArticleTelkom Voip Trunk
Hi, I need help in setting up my Telkom VOIP Trunk in FreePBX. An help would be really appericiated. host is ndf2.ims.telkom.co.za and proxy is ipv.gc.telkomvoip.co.za Cannot get it to work
View Article